Hybrid Vacuum Safety System M16C for Fantasea housings

Tuyau annelé en caoutchouc pour inflateur.

 Son profil ondulé évite l'obstruction totale du tuyau en cas de pliure extrême.

Caractéristiques techniques

• Longueur: 50 cm / 19"
• Matière: caoutchouc

FG7X II S for CANON G7X Mark II, waterproof up to 60 meters, for the CANON G7X Mark II camera without Hybrid vacuum system

This Fantasea housing has been designed so that all the important camera functions are easily accessible, with or without gloves, through levers and push buttons....

Discovery Max Package with FG7X-III S FANTASEA Housing and CANON FG7X-III S + TG20 tray with Trigger Extension

This discovery max package is perfect for you if you want to acquire a complete discovery equipment based on the FG7X-III S. In addition to being able to equip your housing...

Tank/wing quick release couplings CUSTOM DIVERS

This assembler offers a new way to mount your wing on twin bottle or single bottle systems. You can also use it to mount, for example, a backup bottle.

Installation is very simple. With the additional fittings provided, mount the...

Stainless steel bookscrew consisting of one screw and one nut OMS

Stainless steel bolt and nut to be assembled, consisting of a screw and a nut with flat heads to hold accessories on a plate (padded reinforcement, safety back cover...) or to attach a wing to a harness plate.

Sangle de rechange 50mm

2 sangles avec œillet

Pour remplacer les sangles usées sur les harnais.

Kit complet de coude d'inflateur pour wings OMS fabriquées depuis 2015.

Technical data :

• Stainless steel spring strap
• Elastic protection sheath for better comfort
• Automatically adjusts to the diver's feet.
• Size S, M, L, XL, XXL (choose from the list of sizes below the price of the article).
• Delivered with stainless...

M16 Vacuum valve with MARELUX manual pump

This vacuum valve must be mounted on the M16 port of your housing. With this valve, a MARELUX manual pump is provided. This provides an additional layer of peace of mind for the safety of your equipment.

Kit pompe à vide manuelle avec manomètre et vanne de mise à vide 3/8" Ikelite

Cet ensemble permet d'équiper d'une vanne de mise à vide 3/8" les caissons Ikelite équipés d'un orifice 3/8" . C'est la taille standard des commandes rotatives d'un caisson Ikelite. Cette vanne se monte à la...

Vacuum Valve for M16 Accessory Port, designed for Nauticam, Isotta, Nimar, and other housings with an M16 port

This valve can be installed on any housing with a threaded M16 accessory port.

The low-profile design of this valve minimizes interference with control operations on...

MARELUX vacuum detection/moisture alarm PCB set

Thanks to this circuit board, you will be able to prevent leaks and water intrusions inside your housing.