Kit HEED 3 with hose and second stage regulator

Kit SPARE AIR HEED 3 200 with hose and remote second stage regulator + holster

The HEED 3 kit is one of the most widely used safety components on racing boats, for dockside work, and for helicopter pilots. It is compact and easy to transport, fitting naturally into equipment. In the event of an "involuntary" immersion, it allows one to rely on an independent air source and calmly attempt a safe return to the surface from shallow depths. It requires no manipulation to activate and must always be "ready to use" when starting a dive or working in an area where there is a risk of accidental water immersion. Therefore, it must be constantly inflated.

Supplied with:

• 0.28-liter aluminum cylinder
• Service pressure of 207 bar / 3000 psi
• Length of 25 cm / 9.75"
• Diameter of 5.7 cm / 2.25"
• Weight of 0.90 kg / 1.99 lb
• Provides 38 breaths
• CE Marking (mandatory for use in Europe)
• Holster with Velcro closure, mouthpiece protector, safety lanyard, equipped with vertical and horizontal strap loops to position it optimally for each individual.
• DIN or International Yoke filling adapter sold separately.

Important Information:

The use of a CE-marked cylinder is mandatory for use in Europe. Please note that cylinders sold from the USA are not CE-marked and, therefore, are not compliant for use in Europe for boat races, dock work, diving, and helicopters.

The regulator must be serviced annually by an authorized dealer or by TEK PLONGEE.

With hose and remote second stage regulator.

Spare air is sold "empty" and must be filled with air after purchase.