• IKELITE housing for PANASONIC Lumix GH5, GH5S, GH5II
  • IKELITE housing for PANASONIC Lumix GH5, GH5S, GH5II
IKELITE housing for PANASONIC Lumix GH5, GH5S, GH5II

IKELITE housing for PANASONIC Lumix GH5, GH5S, GH5II

Ikelite DL 200 underwater housing waterproof up to 60 meters for Panasonic Lumix GH5, GH5S, GH5-II digital cameras

0
reviews

Leave review
$2,144.18
Tax included
Quantity

Waterproof DL200 housing (DRY LOCK) for Panasonic Lumix GH5, GH5S, GH5-II digital cameras

This next-generation housing offers excellent ergonomics. The transparent Lexan on the rear door allows verification of the correct positioning of the camera body and controls inside the housing. The specially formulated gray color reflects sunlight for better cooling of the device over time, particularly for devices recording in 4K. Compared to black or transparent housings, the gray color provides superior contrast for better LCD screen visualization. The levers and buttons enable the use of nearly all original camera commands. An optional electronic converter compatible with GH5-II, GH5S, GH5 enables retrieval and transmission of TTL information for an external flash: automatically calculates and adjusts flash power based on ambient light. A flash socket, through a waterproof connector, allows the use of an external TTL flash from the Ikelite range: DS51, 125, 160, 161, 162, 230. The sync cable inhibits the internal camera flash, significantly enhancing autonomy. An extra-large, flexible zoom control enables fine and precise focal adjustments. The housing comes equipped with a 1/2" vacuum valve for pre-dive sealing checks (manual vacuum pump sold separately). Ideal for diving, water sports like surfing, pool use, etc. Standard M16 port for accessories. Optionally, an M24 port for an external HDMI monitor can be added (visible in the photo but not included by default); contact us for more information.

Included:

  • Housing
  • Rear O-ring #0132.61 (installed)
  • Front O-ring #0132.45 (installed)
  • Zoom gear retainer #75900 (installed)
  • Port hole cover #0200.92 (installed)
  • Waterproof bulkhead cap #9104.7 (installed)
  • Base with left-hand quick-release handle #4077.67 (installed)
  • Tool for zoom gear retainer #0945.06
  • 0.050" hex key #0945.11
  • 1cc silicone lubricant tube
  • Note: This housing does not include a port! The port is essential for system waterproofing and must be separately ordered according to the type of lens used. Please contact us for personalized advice on this matter.

Accessible Controls:

All major camera controls are accessible from the housing, except for:

  • Diopter adjustment button
  • Rear adjustment wheel
  • Rear wheel locking button (must be unlocked before inserting the camera body into the housing).

Compatible Ports and Domes:

This housing allows the use of most lenses through its DL "DRY LOCK" port system.

>>>>Consult the list of compatible lenses for this housing<<<<

Compatible Accessories:

A selection of accessories and spare parts for this housing can be found in the accessory tab of this product listing.

Feel free to contact us for compatibility advice with your existing equipment.

Compatible External Flashes:

Using an external flash is recommended for improved color reproduction and subject exposure. It is not possible to use a flash with a fiber optic triggering system with this housing.

To utilize the TTL function of Ikelite flashes, a separate Panasonic PT1 TTL electronic converter (ref. IKE46032) must be purchased.

Recommended flashes include:

  • Flash DS51 II (TTL with PANASONIC PT1 46032 converter and manual)
  • Flash DS160 II (TTL with PANASONIC PT1 46032 converter and manual)
  • Flash DS230 (TTTL with PANASONIC PT1 46032 converter and manual)
  • Inon S220 (manual mode only)
  • Sea & Sea YS-D3 Duo (manual mode only)

Compatible Lights:

Photo and video lights are available (contact us for personalized advice)

IKE 71311

Data sheet

Height
184 mm
Width
229 mm
Depth
152 mm
Weight
2.121 kg
Profondeur utilisation
60 mètres
Matière
ABS-PC et Lexan
Type de connectique Flash externe
Flash TTL avec cordon de synchronisation
Marque appareil photo
PANASONIC
Joint étanchéité caisson
IKE 0132.45
Détecteur d'humidité
NON
Pompe à vide
OUI
Flottabilité
Quasi neutre dans l'eau
Type de fixation pour platines
2 fixations par vis 1/4-20 (pas Kodak) espacées de 89mm
Support accessoire sur caisson
Par vis 1/4-20 (pas Kodak) sur le dessus du caisson
Platine de fixation accessoires photo-video
Platine à poignée simple modulable
Système de hublot interchangeable
DL / DRY LOCK IKELITE

Specific References

You might also like
keyboard_arrow_left

Cordon caisson IKELITE / 1 flash IKELITE IKE 45151

Câble de connexion torsadé synchro Ikelite pour liaison entre un caisson Ikelite et un flash Ikelite .

Permet la transmission du TTL.

Livré avec:
  • 1 capuchon de protection de broche Ikelite/Ikelite (IKE 0301)
  • 1 berlingot de graisse silicone Ikelite...
$126.50

Cordon caisson IKELITE / 2 flashs IKELITE IKE 45152

Câble de connexion torsadé synchro Ikelite pour liaison entre caisson Ikelite et deux flashs Ikelite.

Permet la transmission du TTL. 

 

Livré avec:
  • 1 capuchon de protection de broche Ikelite/Ikelite (IKE 0301
  • 1 capuchon de protection de broche...
$202.40

Graisse silicone IKELITE

Pochette de 4 tubes de graisse silicone Ikelite pour matériel photo ou vidéo.

 

Caractéristiques
  • Volume par tube: 1cc
  • Indispensable pour lubrifier les joints et axes de boutons ainsi que les joints de hublots de votre caisson.

 

Ne...

$6.33
keyboard_arrow_right